HP 15C LCD Replacement

[DavidRicchetti]

Step 4 — Remove the display module. Remove the two battery terminals that are connected to the red and black wires by sliding them up to unclip them from the plastic case. The display module can be lifted up along the four plastic posts that hold it in place. Note that there are two additional plastic post penetrating the flexible circuit at the right top corner; and that between those posts is a zebra connector. Take care not to lose that zebra connector should it come loose from the flexible circuit. Also note that there are eight small foam washers to keep track of; four on each side of the display module on the plastic posts.