HEPAX-0C Prototype version ROM images.

[Erik-M]

I recently refurbished two battery packs from two new 9114B drives.
It has a lead acid battery that is dead for sure if the drive was stored for more than a few years.
there is also a fuse in the battery pack.

I know for coincidence because of my recent repairs that W&W modified the charger so it can deliver 3 A instead of the 500mA from the original charger.
If the battery has an open circuit the drive would have worked with the W&W charger but not with the original but if it is shorted the fuse in either the pack, the power supply or both are blown. Its a solder in fuse that looks like a resistor but easy to repair, just use a normal 3A fuse with some wires soldered on.