Post Reply 
Another HP-67 repair query
10-14-2020, 10:11 AM
Post: #4
RE: Another HP-67 repair query
(10-14-2020 07:08 AM)coitboy2000 Wrote:  
(10-14-2020 06:13 AM)teenix Wrote:  The low battery indicator appears to be working.

The sense amp definitely should not get hot. Try carefully unplugging the sense board from the CPU board and try the power again.

cheers

Tony

Ok, I will try that and report back. Thanks.

I decided to give it another good clean, in particular the processor board board. It is behaving as before but the sense amplifier does not seem to get as hot.

There is an adjustable potentiometer (10k) on the card reader board that currently reads around 1.4k, at least in circuit anyway. What should this be set to ? The 3x capacitors on the card reader board still seem ok.

Regards

Richard
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Another HP-67 repair query - coitboy2000 - 10-14-2020, 05:40 AM
RE: Another HP-67 repair query - teenix - 10-14-2020, 06:13 AM
RE: Another HP-67 repair query - coitboy2000 - 10-14-2020 10:11 AM
RE: Another HP-67 repair query - teenix - 10-14-2020, 10:40 AM
RE: Another HP-67 repair query - teenix - 10-14-2020, 11:42 AM
RE: Another HP-67 repair query - teenix - 10-14-2020, 12:06 PM
RE: Another HP-67 repair query - teenix - 10-15-2020, 12:48 AM
RE: Another HP-67 repair query - teenix - 10-18-2020, 11:08 AM
RE: Another HP-67 repair query - teenix - 10-24-2020, 04:14 AM
RE: Another HP-67 repair query - teenix - 10-24-2020, 12:28 PM
RE: Another HP-67 repair query - teenix - 10-26-2020, 04:21 AM



User(s) browsing this thread: 1 Guest(s)