ilper 1.35.2 on Linux

[grsbanks]

(11-17-2020 06:16 PM)Sylvain Cote Wrote:  Try running gtkterm, hit F7 to toggle DTR low, then close gtkterm and retry to communicate with the PILBox.

Thanks for the pointer but unfortunately, that doesn't solve it.

DTR is indeed high but if I lower it, exit gtkterm and then start ilper and attempt to connect, I still get "No response from PILbox".

If I run gtkterm, lower DTR, exit gtkterm and start gtkterm again having done nothing else, DTR is high again.