New update available for Clonix & NoVs users.

[Sylvain Cote]

Allen & Diego,
Basic tests with PicKit2 are also not working on my side, currently investigating, I will come back later with more information and hopefully the solution.
Sylvain

Update #1:

File Download:

• Download: Latest SW Update 20201016 (ClonixConfig v.6.1)
• Download: Latest ROM files (2021-01-05) from Monte
• Installed: Software and ROMs have been installed in c:\apps\Clonix-Nov_Upgr_20201016
  

Test #1: load HEPAX and PPC ROM in a NoV-64d programmed as a NoV-64d (success)

• In ClonixConfig61.exe
  • Module Type: NoV-64(d)
  • Options: HEPAX, 1D
  • Programmer: PicKit2
  • Flash ROM Block 0: HEPAX ROMs, PPCL @ page 1-C & PPCU @ page 1-D
  • Press button: Proceed
    
• In PICkit2V2p06.exe
  • Press button: Auto Import Hex & Write Device
  • Select: AutoImprt.HEX then press button: OPEN
  • After a while I get Programming Successful in the green box
    
• In a 41CL with MMU disable
  • Module in slot 1, CAT 2 shows: "-HEPAD 1D" and "C PPC 1981"
  • Module in slot 3, CAT 2 shows: "-HEPAD 1D" and "C PPC 1981"
    

Test #2: load HEPAX in a NoV-64d programmed as a NoV-64d (success)

• In ClonixConfig61.exe
  • Module Type: NoV-64(d)
  • Options: HEPAX, 1D
  • Programmer: PicKit2
  • Flash ROM Block 0: Only HEPAX ROMs
  • Press button: Proceed
    
• In PICkit2V2p06.exe
  • Press button: Auto Import Hex & Write Device
  • Select: AutoImprt.HEX then press button: OPEN
  • After a while I get Programming Successful in the green box
    
• In a 41CL with MMU disable
  • Module in slot 1, CAT 2 shows: "-HEPAD 1D"
  • Module in slot 3, CAT 2 shows: "-HEPAD 1D"
    

Test #3: load MATH ROM in a NoV-64d programmed as a Clonix-D (not working)

• In ClonixConfig61.exe
  • Module Type: Clonix-D
  • Options: none
  • Programmer: PicKit2
  • Flash ROM Block 0: MATH-1D @ page 8
  • Press button: Proceed
    
• In PICkit2V2p06.exe
  • Press button: Auto Import Hex & Write Device
  • Select: AutoImprt.HEX then press button: OPEN
  • After a while I get Programming Successful in the green box
    
• In a 41CL with MMU disable
  • Module in slot 1, CAT 2 shows: no plug-in ROMs
  • Module in slot 3, CAT 2 shows: no plug-in ROMs