[WP-34S] Troubleshoot internal USB Board

Threaded Mode | Linear Mode

[WP-34S] Troubleshoot internal USB Board

01-23-2021, 09:35 PM (This post was last modified: 01-23-2021 09:36 PM by Harald.)

Post: #6

Harald Offline

Senior Member

Posts: 812
Joined: Dec 2013

RE: [WP-34S] Troubleshoot internal USB Board

I never thought of a flash cable being plugged in when a USB board is installed. I will have to look into what can happen in this case. I would not rule out that the board could be damaged.
So if I get this correctly, you tried flashing via USB board first and had no success. Then you tried the cable and still had no success.
Is the calculator completely unresponsive or is it still running on the old firmware?

Has the board ever worked at all?

« Next Oldest | Next Newest »

Messages In This Thread

[WP-34S] Troubleshoot internal USB Board - Sanjeev Visvanatha - 01-19-2021, 05:29 PM

RE: [WP-34S] Troubleshoot internal USB Board - John Galt - 01-21-2021, 04:35 PM

RE: [WP-34S] Troubleshoot internal USB Board - Sanjeev Visvanatha - 01-22-2021, 12:26 AM

RE: [WP-34S] Troubleshoot internal USB Board - John Galt - 01-22-2021, 12:44 AM

RE: [WP-34S] Troubleshoot internal USB Board - Sanjeev Visvanatha - 01-22-2021, 01:02 AM

RE: [WP-34S] Troubleshoot internal USB Board - Harald - 01-23-2021 09:35 PM

RE: [WP-34S] Troubleshoot internal USB Board - Sanjeev Visvanatha - 01-24-2021, 03:31 AM

User(s) browsing this thread: 1 Guest(s)