Help on (emu48) HP49-50G: IOPAR "corrupted"

[rprosperi]

(02-28-2021 10:12 PM)cdmackay Wrote:  The 50g AUR (pp. D4–D5) confirms those are the default I/O parameter settings.

Those settings correspond to:

115200 baud rate
0 no parity
0 XOFF/XON software flow control disabled for receive
0 XOFF/XON software flow control disabled for transmit
3 3-digit cyclic redundancy check for SEND
1 translate 10 (LF) to/from 10 & 13 (LF & CR)

Thanks. I could not recall what the 'extra' zero is for, I forgot or maybe never realized the flow-control could be enabled only 1 way (which seems kinda strange to me...)