HP Forums / HP Calculators (and very old HP Computers) / General Forum v / Disassembly of HP-19C

Post Reply 
Disassembly of HP-19C
04-05-2021, 01:49 PM
Post: #9
Don Williams Offline
Junior Member
 		Posts: 38
Joined: Apr 2014
RE: Disassembly of HP-19C
You can remove the three brass screws that secure the printer. Then lift the board and gently slide the board down until the battery tabs are clear of the slots in the case. Be careful with the printer flex cable. I never attempted to disconnect that cable.

The ribbon cable between the CPU board and keyboard is soldered. There is no way to separate the boards without unsoldering the cable.
Don't ask me I just lurk here.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Disassembly of HP-19C - Jonas Sandstedt - 03-31-2021, 01:07 PM
RE: Disassembly of HP-19C - Don Williams - 03-31-2021, 02:06 PM
RE: Disassembly of HP-19C - Ren - 04-01-2021, 02:23 PM
RE: Disassembly of HP-19C - Don Williams - 04-01-2021, 02:49 PM
RE: Disassembly of HP-19C - Don Williams - 04-05-2021 01:49 PM
RE: Disassembly of HP-19C - Don Williams - 04-05-2021, 05:04 PM
RE: Disassembly of HP-19C - [kby] - 04-08-2021, 10:06 PM
RE: Disassembly of HP-19C - teenix - 04-11-2021, 07:02 AM
RE: Disassembly of HP-19C - [kby] - 04-12-2021, 07:58 PM
RE: Disassembly of HP-19C - [kby] - 04-17-2021, 01:41 AM



User(s) browsing this thread: 7 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication