[41CL WARP] XEQ+ oddness

[cdmackay]

I've updated my 41CL to the latest 4/4/2021 modules, and can confirm the problem is present there, i.e. without the newer modules from the above zip (which I will try shortly).

I started from backspace-ON memory lost, and did an MMUCLR.

Then updated as normal, CPONLY/AUTOVFY, and noted that OSX3 banks 1 & 2, and PWRX were updated, as well as 9 other pages.

I then used YCRC to check the flash checksums matched the new set, for 4LIB & WARP:

Code:

CSV filename: rom_files_210404.zip/mem_ref_v5.txt
================================================================================​==========================================================
0x120; ;    0x1C539FC4; 0x1C539FC4; 0x1C539FC4; LIBRARY4.ROM;  2021-01-17; ;           4LIB;   N/A; Library-4
0x1B8; ;    0x793A3AEC; 0x793A3AEC; 0x793A3AEC; WARPB1.ROM;    2020-05-02; ;           WARP;    21; Warp-core, bnk 1
0x1B9; ;    0xBD20B531; 0xBD20B531; 0xBD20B531; WARPB2.ROM;    2020-05-02; ;           WARP;    21; Warp-core, bnk 2
0x1BA; ;    0x4EAAA5A5; 0x4EAAA5A5; 0x4EAAA5A5; WARPB3.ROM;    2020-05-01; ;           WARP;    21; Warp-core, bnk 3

and they did. So my flash versions of 4LIB, OSX3, PWRX & WARP all match the 4/4/2021 set.

I then plugged:

Code:

4LIB 4
OSX3 8
PWRX A
WARP B

and tried XEQ+. I started at 'A' (ALENG), and used ENTER to walk through the letters, all fine up to and including 'I'. Then, ENTER again for 'J', which is the first that ought to be No Match.

At this point, the LCD went blank for several seconds, and then displayed:

Code:

@+K@@@@0 '__

The same if I went direct to 'Q'.

Again, note that this is with all modules from the 4/4/2021 zip.


I'll try again, but using the 4LIB & WARP from the above zip.