HP Forums / Not HP Calculators / Not remotely HP Calculators v / Needing help powering up a Sanyo ICC-801D

Post Reply 
Needing help powering up a Sanyo ICC-801D
05-06-2021, 02:03 PM
Post: #4
sislasl Offline
Junior Member
 		Posts: 5
Joined: May 2021
RE: Needing help powering up a Sanyo ICC-801D
(05-04-2021 02:12 PM)Ren Wrote:  This website says it takes 6-7.3 Volts DC external.

http://mycalcdb.free.fr/main.php?l=0&id=5040

I have not seen a photo of it's power jack,
Does the label have any indication of the polarity of the jack?

The owner of vintage calculators inc gave me the info about 6.6 VDC.
There is no indication of the polarity of the jack. I have atttached an image of the jack.


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Needing help powering up a Sanyo ICC-801D - sislasl - 05-06-2021 02:03 PM



User(s) browsing this thread: 1 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication