41CL reset

[rprosperi]

(05-19-2021 11:22 PM)twoweims Wrote:  It is not happening during the update process. I just turn it on after using it normally the day before. Nothing plugged or unplugged, just turned back on after being off for a while. No "BAT" annunciator so I assume not a power problem.

Just to be clear, what I mentioned is not related to the update process per se, but rather the simple insertion or removal of the 2.5mm jack of the serial cable.

Assuming it's not that, and if the posts/contacts are all good, I've no idea, best to wait for Monte to see this and advise. It does sound odd though, as the CL is rock solid reliable as long as the machine is mechanically intact with solid contacts.