HP19c Printer Disassembly

[jjohnson873]

Thanks Bernhard. I also found a 2002 reprint of Michael Meyer's description of disassembling the HP-19c printer, overhauling it and reassembling it. I intend to take photos and post them so others will have a roadmap of what to look for. Michael specifically mentioned that the brass pins hold in the paper guide mechanism need to be removed (he thought the pins were a shaft, versus pins). Then there are several springs, including one that presses the top paper guide against the printhead pressure bar. Knowing that springs fly out at the worst possible moment, during disassembly, and then land and roll to a location that you'd never expect to find them, I will take some extra precautions to contain them.
~ Jim J. ~