MCODE EPROM HARDWARE

[Neve]

(08-26-2021 07:12 PM)Sylvain Cote Wrote:  These were hardware that implemented 10 bit words either in RAM (MLDL & RAM boxes) and/or in EPROM (MLDL & EPROM boxes).
Today, you can use the 41CL, DM-41X or NoV-64d as MLDL.
For the 41CL, you just need to initialize a 41CL internal RAM page with 0x00 and then map that page to the 41 memory space (page 6 to 15).
Then with the ROM of your choice, fill up that RAM page with nut instructions.
Sylvain

Thanks, I’ll have to look into that…

(08-26-2021 07:12 PM)Sylvain Cote Wrote:  Edit 1:
Ángel has created an Excel page with special macros to generate his modules.
I had started to do the same but I have never completed mine.
There are several PC nut assembler available that can generate 4K MCODE modules.
Once you have a 4K module, you just need to transfer it to the target (41CL, DM-41X, Clonix-D, NoV-64d, etc) in the device RAM or Flash.

Names of those PC nut assemblers? Where can I find these?

(08-26-2021 07:12 PM)Sylvain Cote Wrote:  Edit 2:
Look at my HPCC 2020 presentation on Diego's modules, it should gives you some answers to your questions.

Thanks Sylvain,

Watching it now. It’ll probably raise even more questions!