HP10...how difficult to open?

[isanchez]

(12-17-2021 08:01 PM)Mrspock1 Wrote:  Dear Ignacio,

The HP-10 is much less difficult to reassemble than the HP19C. Just be
carefull that the pins do not bend and stay in their position. Then you can
rather easily reassemble the calcuator. I first put the PSU and CPU boards together
such that the two sets of pins were connected. Then assembled the keyboard. In this way only one row of pins need to be put together. I used a rather intense LED torch to
look into the calculator and check that the pins were aligned. It was rather easy in this way.

Wish you luck !

Jef

Thanks a lot!!!
I am going to make a try. I was worried because I read how difficult was for HP19c.

Thanks again. Kind regards

Ignacio