Post Reply 
Sharp PC-1262
02-17-2022, 07:04 PM (This post was last modified: 02-17-2022 07:04 PM by Dan C.)
Post: #21
RE: Sharp PC-1262
(02-16-2022 08:08 PM)robve Wrote:  It really helps to read the 300 page manual... Smile

- Rob

Thanks for all info on the Sharp "filesystem!"

And i know, i just have to learn GERMAN then Wink
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Sharp PC-1262 - Dan C - 02-09-2022, 06:30 PM
RE: Sharp PC-1262 - Dave Britten - 02-09-2022, 06:47 PM
RE: Sharp PC-1262 - robve - 02-09-2022, 08:48 PM
RE: Sharp PC-1262 - Maximilian Hohmann - 02-09-2022, 07:10 PM
RE: Sharp PC-1262 - Dave Britten - 02-09-2022, 07:41 PM
RE: Sharp PC-1262 - Dan C - 02-13-2022, 10:11 AM
RE: Sharp PC-1262 - toml_12953 - 02-13-2022, 10:46 AM
RE: Sharp PC-1262 - robve - 02-13-2022, 04:31 PM
RE: Sharp PC-1262 - Dave Britten - 02-13-2022, 08:56 PM
RE: Sharp PC-1262 - Dan C - 02-14-2022, 06:20 PM
RE: Sharp PC-1262 - robve - 02-14-2022, 08:36 PM
RE: Sharp PC-1262 - Dave Britten - 02-15-2022, 01:27 PM
RE: Sharp PC-1262 - Dan C - 02-15-2022, 05:36 PM
RE: Sharp PC-1262 - Dan C - 02-16-2022, 07:22 PM
RE: Sharp PC-1262 - Dave Britten - 02-16-2022, 07:51 PM
RE: Sharp PC-1262 - Maximilian Hohmann - 02-16-2022, 08:11 PM
RE: Sharp PC-1262 - Dan C - 02-17-2022, 07:00 PM
RE: Sharp PC-1262 - Dave Britten - 02-17-2022, 07:24 PM
RE: Sharp PC-1262 - robve - 02-19-2022, 09:20 PM
RE: Sharp PC-1262 - rprosperi - 02-19-2022, 11:27 PM
RE: Sharp PC-1262 - Valentin Albillo - 02-20-2022, 04:48 AM
RE: Sharp PC-1262 - robve - 02-20-2022, 10:19 PM
RE: Sharp PC-1262 - robve - 02-16-2022, 08:08 PM
RE: Sharp PC-1262 - Dave Britten - 02-16-2022, 08:35 PM
RE: Sharp PC-1262 - robve - 02-16-2022, 09:13 PM
RE: Sharp PC-1262 - Dan C - 02-17-2022 07:04 PM
RE: Sharp PC-1262 - robve - 02-17-2022, 07:42 PM
RE: Sharp PC-1262 - Dave Britten - 02-19-2022, 09:53 PM
RE: Sharp PC-1262 - Dave Britten - 02-20-2022, 01:18 PM
RE: Sharp PC-1262 - robve - 02-20-2022, 02:22 PM
RE: Sharp PC-1262 - Dan C - 03-10-2022, 07:30 PM



User(s) browsing this thread: 2 Guest(s)