pyILPER 1.4.0 released

[floppy]

Using:
- Debian11 anaconda3 pyilper 1.8.3
- python 3.8.12 and Qt 5.12.1
- 64bits and ext4 file system
- lifutils https://github.com/bug400/lifutils/relea..._amd64.deb
it don't access the HDRIVE1.DAT from the zip file from here https://hp.giesselink.com/HPIL/ilper2.4.zip ("issue 1").
And on the other way, the pyilper created LIF file on the PC above is not accessible from giesselink ilper started in "wine" on the same system ("issue 2"; which I for now address to "wine" issue or file system issue).
This is not dramatic: the effect is that for now, I cannot use a LIF file created from the setup above on a raspberry pi4 which starts ilper from "wine" (= not a single LIF file on an USB I could connect on the PC or PI).
So far tested, looks like the LIF files created from my setup PC 64bits above can be read on ilper started directly on windows (testing result from JF Garnier).

I am searching for a solution: using FAT instead of ext4, "wine" setup change,..
Any idea/recommendation is welcome.