HP Forums / HP Calculators (and very old HP Computers) / HP Prime v / The calculator restarts repeatedly after the connection kit is connected to the calcu

Post Reply 
The calculator restarts repeatedly after the connection kit is connected to the calcu
03-08-2022, 02:57 AM (This post was last modified: 03-09-2022 07:43 AM by Tim Roche.)
Post: #6
Tim Roche Offline
Junior Member
 		Posts: 25
Joined: Dec 2013
RE: The calculator restarts repeatedly using CK
jte,

I suspect that my old hp prime is a preproduction or equivalent unit. Back when I purchased my original prime it had some issues (which I do not recall) that made keeping the calculator untenable. After some communications with Tim Wessman, I ended up returning the unit to hp for "repair". The calculator I now have is not the original unit sent in for repair, but a replacement. In fact, it does not have a S/N on the back. About hp prime reports:

Software Version: 2.1.14603 (2021 12 02)
Hardware Version: A
CAS Version: 1.5.0
Serial Number: 90E048C5ADFBB07
Operating System: V0.050.640

The calculator is very finicky when communicating with my laptop and does cycle restart when linked with CK.
ter
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: The calculator restarts repeatedly using CK - Tim Roche - 03-08-2022 02:57 AM



User(s) browsing this thread: 4 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication