HP-48SX MOD issue

[J-F Garnier]

Yes, both the "HP 48 Programmer's Reference Manual" (for the 48S series) and the "HP 48G Series Advanced User's Reference Manual" incorrectly describe the symbolic MOD operation as:
x 'symb' --> 'MOD(x,symb)'
It should be
x 'symb' --> 'x MOD symb'

The remark in each operation description also uses the mod(x,y) notation instead of x mod y.
This clearly comes from the 28S.

There is a similar source of confusion in the HP BASIC, for instance the series 80 machines use the X MOD Y syntax, but the HP-75 and HP-71B use MOD(X,Y).

J-F