Post Reply 
Forth-41
09-08-2022, 11:30 AM
Post: #38
RE: Forth-41
After spending some time with Forth-41 I have more questions that I've been unable to find or workout the answers to.

How do you list user (or all) defined words? There's no WORDS command that I've seen in other implementations.

How do you clear/reset the buffers to free up memory and delete all user defined words and variables?

I've managed to load small simple files with LOADF but note that the flying goose stays on the screen when the load is finished and so there is no indicator that it has finished loading unless you press a key every now and then.

I have tried loading larger files but get periodic tones. I assume this is due to commands or syntax that Forth-41 doesn't support. How do I see what line is causing the problem (hopefully without manually keying in a line at a time)?

I'm a Forth beginner so these may be simple questions :-)

TIA, dmh

Calculator Clique on YouTube
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Forth-41 - jjohnson873 - 12-04-2020, 09:48 PM
RE: Forth-41 - hth - 12-04-2020, 10:03 PM
RE: Forth-41 - Craig Bladow - 12-05-2020, 12:25 AM
RE: Forth-41 - hth - 12-17-2020, 06:17 PM
RE: Forth-41 - Craig Bladow - 12-17-2020, 06:38 PM
RE: Forth-41 - hth - 12-17-2020, 11:05 PM
RE: Forth-41 - Craig Bladow - 12-18-2020, 01:27 AM
RE: Forth-41 - Ángel Martin - 12-06-2020, 07:58 AM
RE: Forth-41 - rprosperi - 12-04-2020, 11:40 PM
RE: Forth-41 - jjohnson873 - 12-05-2020, 01:52 AM
RE: Forth-41 - Gene - 12-05-2020, 02:05 PM
RE: Forth-41 - Sylvain Cote - 12-05-2020, 02:43 PM
RE: Forth-41 - Ángel Martin - 12-06-2020, 07:53 AM
RE: Forth-41 - rprosperi - 12-06-2020, 01:47 PM
RE: Forth-41 - ThomasF - 12-05-2020, 08:52 AM
RE: Forth-41 - Sylvain Cote - 12-05-2020, 02:49 PM
RE: Forth-41 - Ángel Martin - 12-06-2020, 07:48 AM
RE: Forth-41 - Ángel Martin - 12-08-2020, 07:20 AM
RE: Forth-41 - smp - 12-08-2020, 01:55 PM
RE: Forth-41 - Ángel Martin - 12-08-2020, 03:48 PM
RE: Forth-41 - smp - 12-08-2020, 09:31 PM
RE: Forth-41 - ThomasF - 12-08-2020, 01:04 PM
RE: Forth-41 - Ángel Martin - 12-14-2020, 05:56 PM
RE: Forth-41 - rprosperi - 12-14-2020, 06:27 PM
RE: Forth-41 - Massimo Gnerucci - 12-14-2020, 06:44 PM
RE: Forth-41 - Ángel Martin - 12-15-2020, 01:32 PM
RE: Forth-41 - jjohnson873 - 12-27-2020, 06:19 PM
RE: Forth-41 - smp - 12-27-2020, 08:25 PM
RE: Forth-41 - jjohnson873 - 12-28-2020, 02:09 AM
RE: Forth-41 - Ángel Martin - 12-28-2020, 06:48 AM
RE: Forth-41 - CY-CL - 12-27-2020, 07:20 PM
RE: Forth-41 - Gene - 12-27-2020, 07:46 PM
RE: Forth-41 - dmh - 09-07-2022, 11:13 AM
RE: Forth-41 - lmamakos - 09-07-2022, 03:31 PM
RE: Forth-41 - rprosperi - 09-07-2022, 09:03 PM
RE: Forth-41 - Garth Wilson - 09-07-2022, 09:51 PM
RE: Forth-41 - dmh - 09-08-2022, 01:36 AM
RE: Forth-41 - dmh - 09-08-2022 11:30 AM
RE: Forth-41 - rprosperi - 09-09-2022, 04:43 AM
RE: Forth-41 - Garth Wilson - 09-09-2022, 06:25 AM
RE: Forth-41 - dmh - 09-09-2022, 11:14 AM
RE: Forth-41 - Joe Horn - 09-09-2022, 11:29 AM
RE: Forth-41 - dmh - 10-13-2022, 10:06 AM
RE: Forth-41 - Ángel Martin - 10-19-2022, 05:27 PM
RE: Forth-41 - rprosperi - 10-19-2022, 06:01 PM
RE: Forth-41 - dmh - 10-20-2022, 01:18 AM
RE: Forth-41 - dmh - 10-18-2022, 02:38 PM
RE: Forth-41 - Ángel Martin - 10-19-2022, 08:43 AM
RE: Forth-41 - Ángel Martin - 10-20-2022, 05:44 AM
RE: Forth-41 - mfleming - 10-21-2022, 05:50 PM
RE: Forth-41 - Massimo Gnerucci - 10-21-2022, 08:43 PM
RE: Forth-41 - Ángel Martin - 10-23-2022, 02:30 AM
RE: Forth-41 - coniglius - 02-11-2023, 12:52 PM
RE: Forth-41 - dmh - 02-12-2023, 03:40 AM
RE: Forth-41 - coniglius - 02-12-2023, 09:16 AM
RE: Forth-41 - coniglius - 02-12-2023, 09:00 PM
RE: Forth-41 - dmh - 02-24-2023, 01:07 AM
RE: Forth-41 - coniglius - 02-24-2023, 12:06 PM
RE: Forth-41 - dmh - 02-24-2023, 12:15 PM



User(s) browsing this thread: 14 Guest(s)