Examples of Memory MAP with 2x Clonix-D?

[floppy]

(09-29-2022 03:35 PM)Sylvain Cote Wrote:  

(09-22-2022 03:25 PM)floppy Wrote:  so far using Nov64D, it is of interest to use 2x ClonixD (version setup of Nov64d) for making an HP41 quite full.

If you give me what ROM images you want to use, I can give you the configuration to use them with a description as to why each ROM is configured that way.

Hello,
thanks for the proposal.
for my first machine (a CV), I was thinking for a full math setup (no complex rom) with longer programs therefore, an activated hepax would be good.
To be added.
- Hepax4H DoubleMemory Page 4, E and F
- HepaxROM Page 5 (not sure if it works because not contiguous to the page E)
- SandMath4x4 Pages A and B
- Advantage Page 8 and 9
- HP16c Page 3 (or C if it hold not in Page 3)
- Zenrom3B in Page D

From the on-going hw analysis (result below), it should be one page free at the end.
The proposal will make me moving ahead in defining a setup: especially the variants (Std_HEPAX, ADV_Hepax, HEPAX_mem HEPAX_double_mem ) of hepax implementation in Nov64d is still unclear for me since its new for me. I asked to Diego, too.
It mean for now: making a setup analysis script based on missing knowledge (at me), makes me first dependant of the knowledge of this community.

Code:

--------------------------------------------------------------------------------

Owner: arthur, with machine_1, model hp41cv, which is setup nb 3, has following hardware connected: 

[[nov64d,1,1],[clonixd,5,2],[hpil_printer_switch_on,_7646,3]]
 printing channel identified
 hpil channel identified: you can communicate to mass-storage or printer or PCs via pilbox

 list of the identified modules names: [nov64d,clonixd,hpil_printer_switch_on]

 Machine: hp41cv has 3 Port Modules 
 Machine: hp41cv has 1 Nov64d Modules 
 Machine: hp41cv has 1 Clonixd Modules 
 = Machine: hp41cv has 2 Diego modules
 Machine: hp41cv has 0 double x-memory module 
 Machine: hp41cv has 0 x-memory modules 
 Machine: hp41cv has 0 extra time module 
 Machine: hp41cv has 0 xfunction module 
 model and port check ok

 counted port positioning issues: 0

----------------------------------------------------------------------------
Page structure which exists for the choosen model:                          
  scan start:  
  Page 0 busy banks: [system_rom_0]
  Page 1 busy banks: [system_rom_1]
  Page 2 busy banks: [system_rom_2]
  Page 3 free/not initialized
  Page 4 free/not initialized
  Page 5 free/not initialized
  Page 6 busy banks: [hpil_printer_switch_on]
  Page 7 busy banks: [hpil_printer_switch_on]
  Page 8 free/not initialized
  Page 9 free/not initialized
  Page A free/not initialized
  Page B free/not initialized
  Page C free/not initialized
  Page D free/not initialized
  Page E free/not initialized
  Page F free/not initialized
  scan end 
----------------------------------------------------------------------------