The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 795 - File: showthread.php PHP 7.4.33 (FreeBSD)
File Line Function
/showthread.php 795 errorHandler->error




HP Forums / HP Calculators (and very old HP Computers) / General Forum v / how to reseal a 41C module

Post Reply 
how to reseal a 41C module
10-04-2022, 12:35 PM
Post: #1
dmh Offline
Senior Member
 		Posts: 368
Joined: Nov 2020
how to reseal a 41C module
I have a 41C HP IL module that it appears someone has tried to crack open.

The module actually still works and plugs into the 41C fine but needs to be squeezed together carefully as you are doing it so I'd like to make it safer and sturdier to use by sealing it back together somehow.

Can anyone recommend a glue or similar to do this?

I know many glues can damage plastic and this is old plastic so want to check with here first as I have never glued any part of a 41C or peripheral before.

TIA, dmh
Calculator Clique on YouTube
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
how to reseal a 41C module - dmh - 10-04-2022 12:35 PM
RE: how to reseal a 41C module - BillBee - 10-04-2022, 04:42 PM
RE: how to reseal a 41C module - rprosperi - 10-05-2022, 02:21 AM
RE: how to reseal a 41C module - dmh - 10-06-2022, 01:47 AM
RE: how to reseal a 41C module - BillBee - 10-06-2022, 11:09 AM
RE: how to reseal a 41C module - BillBee - 10-06-2022, 02:11 PM
RE: how to reseal a 41C module - GreyUser - 10-10-2022, 04:36 AM
RE: how to reseal a 41C module - BillBee - 10-10-2022, 11:06 AM
RE: how to reseal a 41C module - dmh - 10-10-2022, 11:17 AM
RE: how to reseal a 41C module - dmh - 10-11-2022, 10:38 AM
RE: how to reseal a 41C module - GreyUser - 10-13-2022, 02:08 AM



User(s) browsing this thread: 4 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication