The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 795 - File: showthread.php PHP 7.4.33 (FreeBSD)
File Line Function
/showthread.php 795 errorHandler->error




HP Forums / HP Calculators (and very old HP Computers) / General Forum v / 41C setting the default printer to serial via 82164A

Post Reply 
41C setting the default printer to serial via 82164A
12-01-2022, 12:42 AM (This post was last modified: 12-01-2022 12:44 AM by dmh.)
Post: #1
dmh Offline
Senior Member
 		Posts: 369
Joined: Nov 2020
41C setting the default printer to serial via 82164A
I've just acquired an 82164A IL to serial adaptor and can send and receive data with the default configuration.

I wanted to try serial printing but couldn't find a way to set the default printer to the 82164A without using MANIO.

The problem with using MANIO is that I then can't use mass storage at the same time as everything gets sent to the current device.

Is there a way to set the default printer to be via the 82164A without MANIO?

TIA, dmh

ps I was surprised that the 82164A manual is not available at literature.hpcalc.org. Does someone have a searchable scan?
Calculator Clique on YouTube
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
41C setting the default printer to serial via 82164A - dmh - 12-01-2022 12:42 AM



User(s) browsing this thread: 2 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication