SR-52 not writing cards

[Kees Bouw]

(04-08-2023 04:27 AM)John Garza (3665) Wrote:  Can you tell me the inner and outer diameters of the tubing before you mount it on the shaft? That might help locate it.

Thanks,

-John

Hi John,

Sorry about the time it took to answer your question. The outer diameter is 8,25 mm / 0,325 inch and the inner diameter is 3,9 mm / 0,153 inch. Both measured with a digital caliper on the unused, unmounted tubing. If you like, I can send you a piece of tubing if you PM me your address details.

Kees.