HP 97s test
|
07-18-2023, 01:33 AM
Post: #6
|
|||
|
|||
RE: HP 97s test
(07-15-2023 09:38 AM)teenix Wrote: Mouser Electronics lists the Amphenol 57-30500 connector. Not sure if it is the same as the 97S module or the mating connector. it lists it as obsolete, with 0 in stock, as does DigiKey. There are other connectors with a variety of attachment options; they cost under USD 10. Your best bet is finding a friend above a certain age who may still have a SCSI Centronics cable (50-pin; the printer cables had 37 positions, not 50) that you can cannibalize. The MM80C98 is also long since obsolete; the 74LS368 looks like it has the same functionality, but double-check with the data sheets. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
HP 97s test - zixingcheche - 07-15-2023, 07:06 AM
RE: HP 97s test - AndiGer - 07-15-2023, 08:38 AM
RE: HP 97s test - zixingcheche - 07-15-2023, 09:21 AM
RE: HP 97s test - teenix - 07-15-2023, 09:38 AM
RE: HP 97s test - John Ioannidis - 07-18-2023 01:33 AM
RE: HP 97s test - teenix - 07-18-2023, 02:04 AM
RE: HP 97s test - AndiGer - 07-18-2023, 05:10 PM
RE: HP 97s test - zixingcheche - 07-15-2023, 10:01 AM
|
User(s) browsing this thread: 1 Guest(s)