Thread: hp-41cx / NoV-64d / Hepax XF multi-function

[Sylvain Cote]

Hello Ángel,

Regarding HEPAX 4H ...

My comment about only running on 41CX was made in the context of ClonixConfig software.

My understanding is that to run HEPAX 4H on a HP-41C/CV you need the following ROMs:

Code:

XLIB4_B1.ROM ; XLIB4_B2.ROM ; HEPX4H_1.ROM ; XHEPX_B2.ROM ; HEPX4H_3.ROM ; HEPX4H_4.ROM

My understanding is that to run HEPAX 4H on a 41CX you need the following ROMs:

Code:

LIBRARY4.ROM ; HEPX4H_1.ROM ; HEPX4H_2.ROM ; HEPX4H_3.ROM ; HEPX4H_4.ROM

Unfortunately, right now ClonixConfig current HEPAX 4H config only support the 41CX setup not the 41C/CV setup.
I have not yet check if it is possible to create a custom config that would run on a 41C/CV.

ClonixConfig (v4.2 & 6.1 2020) current HEPAX 4H option only support these ROMs:

Code:

LIBRARY4.ROM ; HEPX4H_1.ROM ; HEPX4H_2.ROM ; HEPX4H_3.ROM ; HEPX4H_4.ROM

As I wrote before, the new Clonix/NoV bank switching scheme (2020+) should support independent page 4 bank switching.

Regarding HEPAX 1D ...

ClonixConfig v4.2 2015 HEPAX 1D uses the following ROMS and the old bank switching scheme (pre-2020)

Code:

HEPX1D_1.ROM ; HEPX1D_2.ROM ; HEPX1D_3.ROM ; HEPX1D_4.ROM

ClonixConfig v4.2 2020 HEPAX 1D uses the following ROMS and the new bank ClonixConfig v6.1 2020 HEPAX 1D uses the following ROMS and the new bank switching scheme (2020+)

Code:

HEPX1-1E.ROM ; HEPX2-1D.ROM ; HEPX3-1D.ROM ; HEPX4-1D.ROM

More testing is needed, but my basic tests hint that a module build with CC2015 works as expected and the one build with CC2020 have issues.
I still need to compare the ROM's and the ASM files between these versions, but my free time is sparse and I have to focus on my HHC presentation and on MAXX testing.