HP Forums / HP Calculators (and very old HP Computers) / HP Prime v / Program size limit (G1 vs G2)

Post Reply 
Program size limit (G1 vs G2)
09-27-2023, 11:26 PM (This post was last modified: 09-27-2023 11:50 PM by Steve Simpkin.)
Post: #5
Steve Simpkin Offline
Senior Member
 		Posts: 1,338
Joined: Dec 2013
RE: Program size limit (G1 vs G2)
(09-27-2023 08:09 PM)rprosperi Wrote:  The G2 definitely has more RAM than a G1, though I don't recall the exact specs.
...

G1 uses a 400 MHz Samsung S3C2416XH-40 (ARM926EJ core, ARMv5 architecture)
G2 uses a 528 MHz NXP i.MX 6ULL MCIMX6Y2 (Cortex A7 core, ARMv7 architecture)

G1 has 32 MB RAM, 256 MB flash
G2 has 256 MB RAM, 512 MB flash

https://www.hpmuseum.org/forum/thread-12...#pid115101

HP Plus RPN/RPL Graphing Calculator Comparison Table
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Program size limit (G1 vs G2) - komame - 09-27-2023, 03:27 PM
RE: Program size limit (G1 vs G2) - Tyann - 09-27-2023, 05:14 PM
RE: Program size limit (G1 vs G2) - komame - 09-27-2023, 09:22 PM
RE: Program size limit (G1 vs G2) - Steve Simpkin - 09-27-2023 11:26 PM
RE: Program size limit (G1 vs G2) - Tyann - 09-28-2023, 04:52 AM
RE: Program size limit (G1 vs G2) - tjurij - 09-28-2023, 12:45 PM
RE: Program size limit (G1 vs G2) - Tyann - 09-28-2023, 06:06 PM
RE: Program size limit (G1 vs G2) - komame - 09-28-2023, 07:34 AM
RE: Program size limit (G1 vs G2) - komame - 09-28-2023, 01:40 PM
RE: Program size limit (G1 vs G2) - komame - 09-30-2023, 04:58 PM
RE: Program size limit (G1 vs G2) - komame - 10-16-2023, 07:15 AM
RE: Program size limit (G1 vs G2) - komame - 10-18-2023, 07:32 AM
RE: Program size limit (G1 vs G2) - komame - 10-21-2023, 07:37 AM



User(s) browsing this thread: 1 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication