Post Reply 
67 is flakey
10-14-2023, 10:13 PM
Post: #18
RE: 67 is flakey
OH NO!! NOW THEY'RE BOTH BAD!

The one that WAS working (previously bad and swapped in another ROM3) was OK for about an hour. Turned it off and replaced the gummy wheel on the other one. Was preparing to do the card reader on the working one and turned it on... BAD!!! The EXACT SAME THING! How can that be???

Do I have 2 units w/a bad ROM? The SAME ROM? Remember, it's the same exact failure mode when run with ROM3 removed! Both are AMI (other ROMs are Mostek) and date codes are close but not identical.

Back to sleepness nights, more or less. :-(

FYI - Tried the rebuilt cardreader (gummy wheel) and no motor action, displays a "3". They both do this.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
67 is flakey - mbielman - 10-09-2023, 04:26 PM
RE: 67 is flakey - mbielman - 10-11-2023, 01:48 AM
RE: 67 is flakey - teenix - 10-11-2023, 03:49 AM
RE: 67 is flakey - John Garza (3665) - 10-11-2023, 06:49 AM
RE: 67 is flakey - mbielman - 10-11-2023, 02:31 PM
RE: 67 is flakey - John Garza (3665) - 10-11-2023, 04:01 PM
RE: 67 is flakey - mbielman - 10-11-2023, 04:08 PM
RE: 67 is flakey - John Garza (3665) - 10-11-2023, 10:39 PM
RE: 67 is flakey - mbielman - 10-11-2023, 04:14 PM
RE: 67 is flakey - teenix - 10-11-2023, 07:40 PM
RE: 67 is flakey - mbielman - 10-11-2023, 08:04 PM
RE: 67 is flakey - teenix - 10-11-2023, 08:18 PM
RE: 67 is flakey - mbielman - 10-11-2023, 11:10 PM
RE: 67 is flakey - mbielman - 10-13-2023, 01:49 AM
RE: 67 is flakey - teenix - 10-13-2023, 02:22 AM
RE: 67 is flakey - mbielman - 10-13-2023, 03:21 AM
RE: 67 is flakey - mbielman - 10-14-2023, 08:31 PM
RE: 67 is flakey - teenix - 10-15-2023, 12:07 AM
RE: 67 is flakey - mbielman - 10-14-2023 10:13 PM
RE: 67 is flakey - mbielman - 10-15-2023, 12:17 AM



User(s) browsing this thread: 3 Guest(s)