Post Reply 
Improving FIX mode
10-20-2023, 10:59 AM (This post was last modified: 10-20-2023 12:32 PM by Albert Chan.)
Post: #5
RE: Improving FIX mode
(10-20-2023 08:07 AM)Pyjam Wrote:  I would expect value 0 to disable the switch to SCI completely. So, a true FIX mode.
0.00555 → FIX 2 → 0.01
0.000555 → FIX 2 → 0.00

I agree this is how FIX mode should work.
It is supposed to lose information! 0.00 is OK!

I do not understand how DIG setting work, and posted the question to issue.
Since DIG=0 match HP behavior, this is my guess.
For FIX-02, ULP = 0.01

DIG=0      HP behavior, flip to SCI if below 10^0/2 = 0.5 ULP      (*)
DIG=1      flip to SCI if below 10^1/2 = 5.0 ULP
...

For true FIX mode, DIG setting is negative, flip = 10^DIG/2 = 0.0

(*) Exception, no flip if FIX mode form already matched value.
     Example, any DIG setting, FIX mode of 0. = 0.000...
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Improving FIX mode - c3d - 10-16-2023, 12:08 PM
RE: Improving FIX mode - Albert Chan - 10-16-2023, 01:28 PM
RE: Improving FIX mode - c3d - 10-16-2023, 08:27 PM
RE: Improving FIX mode - Pyjam - 10-20-2023, 08:07 AM
RE: Improving FIX mode - Albert Chan - 10-20-2023 10:59 AM
RE: Improving FIX mode - c3d - 10-20-2023, 05:07 PM
RE: Improving FIX mode - c3d - 10-20-2023, 04:51 PM
RE: Improving FIX mode - c3d - 10-20-2023, 05:58 PM
RE: Improving FIX mode - Pyjam - 10-20-2023, 11:17 AM
RE: Improving FIX mode - Albert Chan - 10-20-2023, 02:00 PM
RE: Improving FIX mode - c3d - 10-21-2023, 08:53 AM
RE: Improving FIX mode - Pyjam - 10-21-2023, 10:24 AM
RE: Improving FIX mode - c3d - 10-21-2023, 11:26 AM
RE: Improving FIX mode - Pyjam - 10-20-2023, 02:25 PM
RE: Improving FIX mode - agarza - 10-20-2023, 02:56 PM
RE: Improving FIX mode - Pyjam - 10-20-2023, 03:38 PM
RE: Improving FIX mode - agarza - 10-20-2023, 04:39 PM
RE: Improving FIX mode - Pyjam - 10-20-2023, 05:36 PM



User(s) browsing this thread: 2 Guest(s)