Magnetic card inserted in opposite side by Dummy

[teenix]

(12-23-2023 03:05 AM)jftman Wrote:  Will the motor run if no faults are present on 1.5volts?

Yes, maybe a little slower than normal. Maybe take a photo for reference, then disconnect the red and black wires. They might pull out from tiny sockets on the circuit board, or you have to unsolder them, best from the motor.

It should run from 1.5V but slower than normal. Around 2.4V seems to be the normal running voltage. Make sure you know where +ve and -ve was before connecting power.

cheers

Tony