HP Forums / HP Calculators (and very old HP Computers) / General Forum v / HP15c CE POGO programming cable

Post Reply 
HP15c CE POGO programming cable
02-08-2024, 01:41 PM (This post was last modified: 02-08-2024 11:36 PM by ctrclckws.)
Post: #20
ctrclckws Offline
Member
 		Posts: 146
Joined: Sep 2018
RE: HP15c CE POGO programming cable
Received my cable last night, followed the instructions and updated one of my 15C CE's this morning.

The other is in its box and will take a little more time to get out.

I then attempted to take a 2018 (9CJ8....) 12C and upload the patched file.
The first attempt did not boot.
Since I also captured the 12C ROM, according to the same instructions, I uploaded that back and it recovered.

My question is, what next, to let a sufficiently modern 12C be a 16C.

Evening update: Patched my 2nd 15C CE, and gave it another shot on the 12C. SUCCESS!
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
HP15c CE POGO programming cable - Divasson - 01-25-2024, 10:48 AM
RE: HP15c CE POGO programming cable - Gene - 01-25-2024, 01:11 PM
RE: HP15c CE POGO programming cable - ctrclckws - 02-08-2024 01:41 PM
RE: HP15c CE POGO programming cable - ebs - 02-12-2024, 11:36 PM



User(s) browsing this thread: 26 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication