HP Forums / HP Calculators (and very old HP Computers) / General Forum v / Modified HP-71B MultiMOD Issue

Post Reply 
Modified HP-71B MultiMOD Issue
02-24-2024, 02:03 AM (This post was last modified: 02-24-2024 03:54 AM by Sylvain Cote.)
Post: #4
Sylvain Cote Offline
Senior Member
 		Posts: 2,162
Joined: Dec 2013
RE: Modified HP-71B MultiMOD Issue
Hello Mike,

(02-24-2024 01:33 AM)BitWiz Wrote:  I was under the impression that there were both 16K relocatable versions and 32k Fixed at 0xE000 versions.
You are correct, if you try to install both module at the same time, both module will map itself to the same address (0xE0000) resulting in a bus lockup.
Which I can confirm because I just tried it. Wink

Code:
FORTHROM.BIN 16K relocatable
HRDFORTH.BIN 32K fixed at 0xE0000
FTH41ROM.BIN 16K relocatable
HRDFTH41.BIN 32K fixed at 0xE0000

Sylvain

edit: typo
Sylvain Côté
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Modified HP-71B MultiMOD Issue - BitWiz - 02-23-2024, 11:34 PM
RE: Modified HP-71B MultiMOD Issue - Sylvain Cote - 02-24-2024 02:03 AM
RE: Modified HP-71B MultiMOD Issue - KimH - 02-24-2024, 08:09 PM



User(s) browsing this thread: 1 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication