Post Reply 
HP75D and data acquisition unit HP3421A
02-28-2024, 02:36 PM (This post was last modified: 02-28-2024 05:56 PM by Sylvain Cote.)
Post: #9
RE: HP75D and data acquisition unit HP3421A
(02-28-2024 08:37 AM)hesc Wrote:  In my other HP75D I see 2 empty slots and the third one is occupied by a rather large tele communications unit around the HP75D, I believe.
That should be the 82718A Expansion Pod.

(02-28-2024 11:14 AM)Dave Frederickson Wrote:  If you don't have an I/O ROM you can use the I/O Utilities.
Yep!

But it does not contains the autoloop keyword, so you will have to do it manually.
Code:
assignio ':E1'
assignio ':P1,:M1'

OUTPUT will also be missing, only SENDIO, ENTIO$ & SEND? commands are part of this lex file.
These are lower level than OUTPUT, I do not have the time to do this right now, but later I can rework your test program to use these keywords instead.

Other than here, there is a HP-75 users group that can answer your questions and have all the documents regarding that machine.

Sylvain Côté
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: HP75D and data acquisition unit HP3421A - Sylvain Cote - 02-28-2024 02:36 PM



User(s) browsing this thread: 3 Guest(s)