HP Forums / Not HP Calculators / Not remotely HP Calculators v / SR-52A rebuild project (SR-52A 942058 LTA4176)

Post Reply 
SR-52A rebuild project (SR-52A 942058 LTA4176)
04-21-2024, 12:17 PM
Post: #26
Nicoverduin Offline
Junior Member
 		Posts: 5
Joined: Jul 2018
RE: SR-52A rebuild project (SR-52A 942058 LTA4176)
I found these nice little 4x4mm membrane switches. This would save me a lot prolems with the loose disc membranes currently. I ordered 150 of them for a total of about 10euro. Test a few when they come in and if they are ok I will use them.

I will see if someone can cut the PCB tomorrow at my school so I can verify it will fit before sending it to China for production.

[Image: SR52%20Key%20pad%20V2.jpeg]

To be continued
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: SR-52 rebuild project - albertofenini - 03-05-2021, 02:14 PM
RE: SR-52 rebuild project - jebem - 03-05-2021, 03:33 PM
RE: SR-52 rebuild project - albertofenini - 03-05-2021, 03:39 PM
RE: SR-52 rebuild project - albertofenini - 03-05-2021, 04:50 PM
RE: SR-52 rebuild project - jebem - 03-05-2021, 05:16 PM
RE: SR-52 rebuild project - albertofenini - 03-05-2021, 06:28 PM
RE: SR-52 rebuild project - jebem - 03-05-2021, 08:26 PM
RE: SR-52 rebuild project - albertofenini - 03-05-2021, 09:53 PM
RE: SR-52 rebuild project - albertofenini - 03-05-2021, 09:12 PM
RE: SR-52 rebuild project - albertofenini - 03-06-2021, 03:59 PM
RE: SR-52A rebuild project (SR-52A 942058 LTA4176) - Nicoverduin - 04-21-2024 12:17 PM



User(s) browsing this thread: 3 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication