Post Reply 
Nov64d & PicKit 2
06-08-2024, 05:43 PM (This post was last modified: 06-11-2024 01:47 PM by Sylvain Cote.)
Post: #4
RE: Nov64d & PicKit 2
There are several rules that you must follow with Clonix configuration software if you do not want to have problems.

Some of these are:
  • ROM files must be in the same directory as the ClonixConfig61 software.
  • ROM filename must follow the old 8.3 naming with no space in it.
  • In PicKit 2 programming software, the hex firmware must be loaded manually.
    • click on the "Auto Import Hex + Write Device" push button to bring up the "Import Hex File" dialog.
    • make sure the current directory is the same as the ClonixConfig61 currently running. (I have been bitten several times on this one)
    • select the "AutoImprt.HEX" file in the file list (date and time should not be older than a minute)
    • press the "Open" push button to load the file and start the programming session.
edit: typos

Sylvain Côté
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Nov64d & PicKit 2 - Papymouzot - 06-07-2024, 11:49 AM
RE: Nov64d & PicKit 2 - Hiwi - 06-07-2024, 01:08 PM
RE: Nov64d & PicKit 2 - Papymouzot - 06-08-2024, 10:12 AM
RE: Nov64d & PicKit 2 - Sylvain Cote - 06-08-2024 05:43 PM
RE: Nov64d & PicKit 2 - Diego Diaz - 06-08-2024, 10:40 PM
RE: Nov64d & PicKit 2 - teenix - 06-09-2024, 12:11 AM
RE: Nov64d & PicKit 2 - Papymouzot - 06-11-2024, 10:01 AM



User(s) browsing this thread: 1 Guest(s)