HP Forums / HP Calculators (and very old HP Computers) / General Forum v / Contemplating using a HP 82002A charger/adapter with a HP 67 in Australia.

Post Reply 
Contemplating using a HP 82002A charger/adapter with a HP 67 in Australia.
09-13-2014, 03:08 PM
Post: #2
jebem Offline
Senior Member
 		Posts: 1,355
Joined: Feb 2014
RE: Contemplating using a HP 82002A charger/adapter with a HP 67 in Australia.
In my region (Lisbon, Portugal) the nominal grid voltage is 230VAC and at the moment it is at 232VAC.
My charger input selector is at position "172 to 254V~" and it just gets warm after 8 hours of charging.

The only problem could be the plug compatibility between the charger and the wall outlet in your region of Australia.
Jose Mesquita
RadioMuseum.org member
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Contemplating using a HP 82002A charger/adapter with a HP 67 in Australia. - jebem - 09-13-2014 03:08 PM



User(s) browsing this thread: 1 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication