HP Forums / HP Calculators (and very old HP Computers) / General Forum v / ENG display mode on HP-15C

Post Reply 
ENG display mode on HP-15C
08-22-2024, 12:06 PM
Post: #2
Joe Horn Offline
Senior Member
 		Posts: 2,018
Joined: Dec 2013
RE: ENG display mode on HP-15C
"ENG n" mode displays n+1 significant digits of the mantissa. Therefore, ENG 0 mode displays only the first significant digit of the mantissa (rounded up when necessary). Thus pi times 100 in ENG 0 mode is properly displayed as 300 with an exponent of 00. This is true on all HP calculators (I'm pretty sure).
<0|ΙΈ|0>
-Joe-
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
ENG display mode on HP-15C - Pekis - 08-22-2024, 11:20 AM
RE: ENG display mode on HP-15C - Joe Horn - 08-22-2024 12:06 PM
RE: ENG display mode on HP-15C - Pekis - 08-22-2024, 12:26 PM
RE: ENG display mode on HP-15C - RPNerd - 08-22-2024, 12:47 PM
RE: ENG display mode on HP-15C - Pekis - 08-22-2024, 01:31 PM
RE: ENG display mode on HP-15C - RPNerd - 08-22-2024, 03:06 PM
RE: ENG display mode on HP-15C - brouhaha - 08-24-2024, 01:50 AM
RE: ENG display mode on HP-15C - KeithB - 08-22-2024, 01:40 PM
RE: ENG display mode on HP-15C - Pekis - 08-22-2024, 03:29 PM
RE: ENG display mode on HP-15C - RPNerd - 08-22-2024, 04:27 PM
RE: ENG display mode on HP-15C - Pekis - 08-22-2024, 07:33 PM
RE: ENG display mode on HP-15C - RPNerd - 08-24-2024, 07:35 AM
RE: ENG display mode on HP-15C - Pekis - 08-22-2024, 04:35 PM
RE: ENG display mode on HP-15C - AndiGer - 08-24-2024, 05:18 AM



User(s) browsing this thread: 1 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication