Post Reply 
ENG display mode on HP-15C
08-24-2024, 03:47 PM (This post was last modified: 08-24-2024 04:03 PM by AnnoyedOne.)
Post: #18
RE: ENG display mode on HP-15C
From p59 of the HP-15C Owner's Handbook (November 1985, Rev. G)

Quote:Engineering Notation Display

[ENG] (engineering) format displays numbers in an engineering
notation format in a manner similar to [SCI], except:

* In engineering notation, the first significant digit is always
present in the display. The number you key in after [f] [ENG]
specifies the number of additional digits to which you want to
round the display.

* Engineering notation shows all exponents in multiples of
three.

So [ENG] 0 does exactly what the manual says Smile As RPNerd said that may not be what one thinks that it should do.

A1

PS: The HP-15C LE and CE manuals I have say the exact same thing.

HP-15C (2234A02xxx), HP-16C (2403A02xxx), HP-15C CE (9CJ323-03xxx), HP-20S (2844A16xxx), HP-12C+ (9CJ251)

Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
ENG display mode on HP-15C - Pekis - 08-22-2024, 11:20 AM
RE: ENG display mode on HP-15C - Joe Horn - 08-22-2024, 12:06 PM
RE: ENG display mode on HP-15C - Pekis - 08-22-2024, 12:26 PM
RE: ENG display mode on HP-15C - RPNerd - 08-22-2024, 12:47 PM
RE: ENG display mode on HP-15C - Pekis - 08-22-2024, 01:31 PM
RE: ENG display mode on HP-15C - RPNerd - 08-22-2024, 03:06 PM
RE: ENG display mode on HP-15C - brouhaha - 08-24-2024, 01:50 AM
RE: ENG display mode on HP-15C - KeithB - 08-22-2024, 01:40 PM
RE: ENG display mode on HP-15C - Pekis - 08-22-2024, 03:29 PM
RE: ENG display mode on HP-15C - RPNerd - 08-22-2024, 04:27 PM
RE: ENG display mode on HP-15C - Pekis - 08-22-2024, 07:33 PM
RE: ENG display mode on HP-15C - RPNerd - 08-24-2024, 07:35 AM
RE: ENG display mode on HP-15C - Pekis - 08-22-2024, 04:35 PM
RE: ENG display mode on HP-15C - AndiGer - 08-24-2024, 05:18 AM
RE: ENG display mode on HP-15C - AnnoyedOne - 08-24-2024 03:47 PM



User(s) browsing this thread: 2 Guest(s)