PX41CX

[Pierre]

(08-29-2024 05:39 PM)revwillie Wrote:  

(08-29-2024 05:24 PM)krischik Wrote:  The first step would be to find the manual. It's no where to be found on https://paxer.net/px41cx. All I found is https://paxer.net/px41cx/manual.html but that is fairly basic information only.

this one: https://clones.phweb.me/download/manuals..._A5_v1.pdf

But I'm not sure if you can use .bat if you aren't in windows. Pierre shows where to put the python stuff and the syntax of the python command is based on the file naming scheme he proposes: %num% comes from a user prompt

python -u tools/prog.py -t uart -u COM8 -b 115200 -d avr128da28 --fuses 5:0b11001001 6:0x04 7:0x00 8:0x00 -f PX41CX_V2/main%numv%.hex -a write -v

Hi,
I don't think the fact that the system is not windows is too annoying.
Whatever the system a python command is a python command...
I just built a command file parameterized from the command line that Alex (who works on Mac) gave me
You just have to adapt to the files and their paths and to the COM port with its speed.
tools/prog.py = python interface tools
-u COM8 -b 115200 = serial port and speed
PX41CX_V2/main%numv%.hex = path and name of the firmware file
Pierre