New firmware for the Swissmicros DM15L

[Helix]

(Yesterday 06:16 AM)Johnp_g Wrote:  BTW is there an easy way of skipping to the end of program memory to add a new label/program. The HP15C uses "f (Clear Prog)" while in RUN mode to jump to the start of memory and new Label/Prog is entered "On top" of existing one(s) which are pushed downwards as new lines are added above. LF15C uses "f(Clear Prog)" in both Run and Prog mode to clear a specified program label. Moving to the start of memory seems not to be correct, as adding a new LBL there puts it BELOW the existing one, rather than above it. I find I'm using SST to scroll down to the end of existing progs to enter new ones. I may be missing something.

I suppose that programming features are not yet complete. There should be a 000 step, and GTO CHS nnn should jump to the nnn line number.
In the meantime, there is a workaround: enter LBL 99 (for example) after the last instruction of your program, and in run mode enter GTO 99.
And then, g P/R g BST g BST.