New firmware for the Swissmicros DM15L

[Helix]

(09-23-2024 03:54 PM)jebedeo Wrote:  2. The bug in Roll down is fixed

Here is another one
1 ENTER 2 ENTER 3 ← 4 and then R↓ R↓ should give 2 then 1 on the X register, but it gives 2 and then 2 again.
In fact, the HP behavior can be replicated with two presses on ←, but I find this confusing. When the leftmost digit is cleared with backspace, the X register should be 0, without stack lift on the next entry.