TULIP4041 Startup Question
|
10-21-2024, 02:34 PM
Post: #3
|
|||
|
|||
RE: TULIP4041 Startup Question
I have messed up something. I had this issue in an earlier firmware version and thought it was fixed. It might be a corner case due to timing of the FI output. I had some changes in my VS Code and GitHub configuration and things went wrong there.
A new firmware file is now on my GitHub. Please observe the following: - follow the instructions in the documentation to go to BOOTSEL mode and upgrade firmware - firmware now runs at 125 MHz (was 150 MHZ) - FI output is fixed, and HP-IL now works - FI input is broken, so you will see all flags active in the tracer, which is not true of course, to be fixed - I have removed the sources as this is for a non-working configuration - make certain that JP2 is closed, this enables driving FI Regards, Meindert |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 5 Guest(s)