Flashing HP15CE with linux

[AnnoyedOne]

(11-27-2024 05:21 PM)blackjetrock Wrote:  ...so I think it's the right chip or chip family.

I'm looking at the programming instructions (PDF dated 24th July 2024) I have.

The default, at SAM-BA 2.18 launch, is "COM1" as the (serial!) interface and at91cap9-dk_mem18 as the "board".

That needs to be changed to "USBserial\COMx" where x may change and the board as "sam4l-ek".

Note the lack of any AT91. Different hardware/bootloader/firmware/cable etc.

A1