Search
Member List
Calendar
Help
|
Flashing HP15CE with linux
|
|
11-28-2024, 02:13 PM
(This post was last modified: 11-28-2024 04:04 PM by AnnoyedOne.)
Post: #32
|
|||
|
|||
RE: Flashing HP15CE with linux
(11-28-2024 01:24 PM)Sylvain Cote Wrote: I have tried several things last night, all unsuccessful... I don't know Linux but (11-27-2024 04:09 PM)blackjetrock Wrote: -I- Loading applet applet-flash-sam4l4.bin at address 0x20002000 looks wrong. The Windows version of SAM-BA 2.18 uses 0x20004000 (assigned when selecting the "board"?). The ATSAM4LC2CA starts its flash at 0x20000000 but the first 16KB is the write-protected bootloader so trying to write to 0x20002000 will fail. Can the offset be changed from 0x2000 to 0x4000 as in the Windows version? A1 PS: The AT91SAM7L128 had a 8KB bootloader so an offset of 0x2000 was correct for it. HP-15C (2234A02xxx), HP-16C (2403A02xxx), HP-15C CE (9CJ323-03xxx), HP-20S (2844A16xxx), HP-12C+ (9CJ251) |
|||
|
|
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 21 Guest(s)