[WP-34S] Cable and flashing options for Mac users

[John Galt]

(11-29-2014 05:50 PM)John Galt Wrote:  I'm still evaluating which pins I will need since Katie's link is outdated. The dimension of the pin end that fits into the header socket is uncertain ...

After receiving the header sockets I think .68mm barrel diameter spring pins will work. The header socket pins are .5mm diameter and fit into their own sockets with a little wiggle room. If they don't work I'll have wasted about $3.50. In any event I can find no other spring loaded pins with any dimension closer to what appears to be required.

If anyone wants to search for them they are listed as "P50-B1 Dia 0.68mm Length 16mm 75g Spring Test Probe Pogo Pin". B1 apparently designates 30° sharp ends. The same pin with a hemispherical end will be listed as "P50-J1".