HP Forums / HP Calculators (and very old HP Computers) / General Forum v / HP 32SII success and woes

Post Reply 
HP 32SII success and woes
02-15-2015, 04:21 PM
Post: #30
Bruce Larrabee Offline
Junior Member
 		Posts: 36
Joined: Jan 2014
RE: HP 32SII success and woes
You say the calc operates normally if you connect the 'twisty' to ground? I had a calc
recently that had a poor contact with the 'twisty' to PCB ground path. It was dead. Never saw this before. A little solder on the pads near one of the 'twisty' solved it.

Also I think the capacitor is tantalum.
Lead, Follow or Get Out of the Way...
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: HP 32SII success and woes - renif - 02-10-2015, 01:56 PM
RE: HP 32SII success and woes - rprosperi - 02-11-2015, 02:12 PM
RE: HP 32SII success and woes - rprosperi - 02-11-2015, 10:55 PM
RE: HP 32SII success and woes - rprosperi - 02-12-2015, 12:21 AM
RE: HP 32SII success and woes - rprosperi - 02-13-2015, 12:51 PM
RE: HP 32SII success and woes - rprosperi - 02-13-2015, 06:53 PM
RE: HP 32SII success and woes - rprosperi - 02-14-2015, 02:03 PM
RE: HP 32SII success and woes - jebem - 02-16-2015, 09:36 AM
RE: HP 32SII success and woes - jebem - 02-16-2015, 03:22 PM
RE: HP 32SII success and woes - Bruce Larrabee - 02-15-2015 04:21 PM
RE: HP 32SII success and woes - jebem - 02-17-2015, 03:05 PM
RE: HP 32SII success and woes - jebem - 02-20-2015, 03:39 PM
RE: HP 32SII success and woes - rprosperi - 02-28-2015, 04:32 AM



User(s) browsing this thread: 6 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication