NoVRAM / Clonix - Windows XP and a driver, ClonixCfgWin, questions

[Sylvain Cote]

(02-17-2015 03:55 PM)Gene Wrote:  Ok, changed to a Win7 laptop. Driver installs. The Windows ClonixConfig.exe file runs.

However, I get an error trying to program the NoVRAM.

Pictures show how I set up the configurator and the error I get.

?

Config:

https://dl.dropboxusercontent.com/u/1002...icture.JPG


Error:

https://dl.dropboxusercontent.com/u/1002...0error.JPG

Hello Gene,

First, the two PPC images are configured to be in the same port.
In your configuration ...
PPCAPS1 should be in port C (rom is configured for lower port)
PPCAPS2 should be in port D (rom is configured for upper port)
BOOKAPS should be in port E

Second, I would check where the USB-to-Serial port has been assigned
by starting the driver manager and looking at the serial port number.

Sorry for not helping completely, I have very little time right now.

Sylvain