The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 795 - File: showthread.php PHP 7.4.33 (FreeBSD)
File Line Function
/showthread.php 795 errorHandler->error




HP Forums / Not HP Calculators / Not quite HP Calculators - but related v / Recover from bad erase

Post Reply 
Recover from bad erase
03-09-2015, 01:41 AM
Post: #1
cmumford Offline
Junior Member
 		Posts: 3
Joined: Feb 2015
Recover from bad erase
So I did what another user here did. Successfully flashed to 34s firmware, but then tried to reflash, but using the initial method, not the ON+STO+STO... upgrade procedure described in the manual.

So my 20b appears to be dead - is it, or can it be recovered somehow?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Recover from bad erase - cmumford - 03-09-2015 01:41 AM
RE: Recover from bad erase - BarryMead - 03-09-2015, 04:04 AM
RE: Recover from bad erase - cmumford - 03-09-2015, 04:14 AM
RE: Recover from bad erase - BarryMead - 03-09-2015, 04:17 AM
RE: Recover from bad erase - John Galt - 03-09-2015, 09:36 PM
RE: Recover from bad erase - BarryMead - 03-09-2015, 04:19 AM



User(s) browsing this thread: 2 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication