HP Forums / HP Calculators (and very old HP Computers) / General Forum v / [50G] Question

Post Reply 
[50G] Question
03-14-2015, 10:12 AM
Post: #28
Han Offline
Senior Member
 		Posts: 1,882
Joined: Dec 2013
RE: [50G] Question
(03-14-2015 10:11 AM)Tugdual Wrote:  Thank you all for comments, recommendations and directions. Still in the process of discovering, this one is definitely a big chunk to swallow...
I'm struggling with the Tool meny →BEG and →END. These two commands seem to systematically place the cursor at the beginning of the edition. Just in case that matters, I made the definitive choice to stick on RPN (otherwise I could as well visit Texas!).
The two others ←SKIP and SKIP→ are just searching for spaces... not a big use. Is there a way to move on next '«' or '»' ?

If you install Emacs or Jazz, they each have editors that will find the closing delimeters. The downside is their size if all you need is an editor.
Graph 3D | QPI | SolveSys
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[50G] Question - Tugdual - 03-09-2015, 06:49 AM
RE: [50G] Question - Massimo Gnerucci - 03-09-2015, 07:09 AM
RE: [50G] Question - Tugdual - 03-09-2015, 06:02 PM
RE: [50G] Question - BartDB - 03-12-2015, 09:38 AM
RE: [50G] Question - MarkMason - 03-12-2015, 03:55 PM
RM - Tugdual - 03-09-2015, 09:36 PM
RE: [50G] Question - Marcus von Cube - 03-09-2015, 09:50 PM
RE: [50G] Question - Tugdual - 03-10-2015, 02:41 AM
RE: [50G] Question - cutterjohn - 03-22-2015, 11:18 PM
RE: [50G] Question - Tugdual - 03-24-2015, 06:51 AM
RE: [50G] Question - Tim Wessman - 03-25-2015, 04:33 AM
RE: [50G] Question - Tugdual - 03-25-2015, 12:08 PM
RE: [50G] Question - Claudio L. - 03-26-2015, 02:50 PM
RE: [50G] Question - Tugdual - 03-11-2015, 09:24 PM
RE: [50G] Question - Massimo Gnerucci - 03-11-2015, 09:54 PM
RE: [50G] Question - BartDB - 03-12-2015, 09:34 AM
RE: [50G] Question - Massimo Gnerucci - 03-12-2015, 12:58 PM
RE: [50G] Question - BartDB - 03-12-2015, 05:26 PM
RE: [50G] Question - matthiaspaul - 03-11-2015, 11:08 PM
RE: [50G] Question - Tugdual - 03-12-2015, 08:28 PM
RE: [50G] Question - Marcus von Cube - 03-12-2015, 09:47 PM
RE: [50G] Question - Tugdual - 03-12-2015, 10:08 PM
RE: [50G] Question - Massimo Gnerucci - 03-12-2015, 10:16 PM
RE: [50G] Question - Jlouis - 03-25-2015, 01:26 AM
RE: [50G] Question - Massimo Gnerucci - 03-25-2015, 06:55 AM
RE: [50G] Question - Jlouis - 03-25-2015, 11:17 AM
RE: [50G] Question - Gerald H - 03-25-2015, 12:00 PM
RE: [50G] Question - rprosperi - 03-12-2015, 11:22 PM
RE: [50G] Question - MarkMason - 03-13-2015, 01:30 AM
RE: [50G] Question - Marcio - 03-12-2015, 09:04 PM
RE: [50G] Question - Tugdual - 03-12-2015, 09:44 PM
RE: [50G] Question - Marcio - 03-12-2015, 10:00 PM
RE: [50G] Question - Tugdual - 03-12-2015, 10:16 PM
RE: [50G] Question - Marcio - 03-12-2015, 10:26 PM
RE: [50G] Question - Tugdual - 03-13-2015, 12:04 AM
RE: [50G] Question - Tugdual - 03-14-2015, 10:11 AM
RE: [50G] Question - Han - 03-14-2015 10:12 AM
RE: [50G] Question - Tugdual - 03-18-2015, 09:31 PM
RE: [50G] Question - Gilles - 03-19-2015, 06:04 PM
RE: [50G] Question - Han - 03-22-2015, 11:33 PM
RE: [50G] Question - Tugdual - 03-22-2015, 11:16 AM
RE: [50G] Question - Gilles - 03-23-2015, 12:39 PM
RE: [50G] Question - Tugdual - 03-24-2015, 06:41 AM
RE: [50G] Question - Gilles - 03-28-2015, 12:42 PM
RE: [50G] Question - Tugdual - 03-29-2015, 09:59 PM
RE: [50G] Question - Tugdual - 03-27-2015, 12:44 PM
RE: [50G] Question - rprosperi - 03-27-2015, 01:02 PM
RE: [50G] Question - Tugdual - 03-27-2015, 09:57 PM
RE: [50G] Question - Han - 03-27-2015, 03:02 PM
RE: [50G] Question - Tugdual - 03-27-2015, 10:04 PM
RE: [50G] Question - Tugdual - 04-08-2015, 06:21 AM
RE: [50G] Question - BartDB - 04-08-2015, 09:01 AM
RE: [50G] Question - Sukiari - 04-08-2015, 06:19 PM
RE: [50G] Question - Guenter Schink - 04-08-2015, 06:43 PM
RE: [50G] Question - Tugdual - 04-08-2015, 08:59 PM
RE: [50G] Question - Massimo Gnerucci - 04-08-2015, 09:23 PM
RE: [50G] Question - zx81 - 04-09-2015, 03:01 AM
RE: [50G] Question - Tugdual - 04-21-2015, 06:45 PM
RE: [50G] Question - Voldemar - 04-21-2015, 08:32 PM
RE: [50G] Question - Tugdual - 04-21-2015, 08:37 PM
RE: [50G] Question - DavidM - 04-23-2015, 02:15 AM
RE: [50G] Question - Claudio L. - 05-03-2015, 12:50 AM
RE: [50G] Question - HrastProgrammer - 05-03-2015, 08:10 AM
RE: [50G] Question - Tugdual - 05-03-2015, 09:30 AM
RE: [50G] Question - HrastProgrammer - 05-03-2015, 10:25 AM
RE: [50G] Question - DavidM - 05-04-2015, 05:40 PM
RE: [50G] Question - DavidM - 05-03-2015, 04:17 PM
RE: [50G] Question - HrastProgrammer - 05-03-2015, 05:14 PM
RE: [50G] Question - Massimo Gnerucci - 05-03-2015, 06:00 PM
RE: [50G] Question - DavidM - 05-03-2015, 06:17 PM
RE: [50G] Question - Massimo Gnerucci - 05-03-2015, 06:30 PM
RE: [50G] Question - HrastProgrammer - 05-03-2015, 06:38 PM
RE: [50G] Question - DavidM - 05-03-2015, 08:47 PM
RE: [50G] Question - HrastProgrammer - 05-04-2015, 04:52 AM
RE: [50G] Question - DavidM - 05-04-2015, 06:52 PM
RE: [50G] Question - HrastProgrammer - 05-03-2015, 06:39 PM
RE: [50G] Question - Tugdual - 05-01-2015, 05:09 PM
RE: [50G] Question - Gilles - 05-01-2015, 05:29 PM
RE: [50G] Question - Tugdual - 05-01-2015, 06:41 PM
RE: [50G] Question - Gerald H - 05-03-2015, 08:49 AM
RE: [50G] Question - HrastProgrammer - 05-03-2015, 09:25 AM
RE: [50G] Question - Gerald H - 05-03-2015, 09:51 AM
RE: [50G] Question - HrastProgrammer - 05-03-2015, 10:55 AM
RE: [50G] Question - Gerald H - 05-03-2015, 08:31 PM
RE: [50G] Question - HrastProgrammer - 05-04-2015, 04:35 AM
RE: [50G] Question - Gerald H - 05-03-2015, 05:07 PM



User(s) browsing this thread: 5 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication