HP Forums / HP Calculators (and very old HP Computers) / General Forum v / [41] Odd display problem

Post Reply 
[41] Odd display problem
04-28-2015, 07:55 PM
Post: #10
emece67 Offline
Senior Member
 		Posts: 379
Joined: Feb 2015
RE: [hp41] Odd display problem
I've found that applying a 7 kHz, 0-6 V square wave to the OS1 pin of the display board solves the problem, even the 10 minutes timeout works as expected.

Thus I'm planning to attach a oscillator to the machine. It must only work when the DPWO signal is high. Seems feasible... except for the low power requirement.

Regards.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[41] Odd display problem - emece67 - 04-19-2015, 07:45 PM
RE: [hp41] Odd display problem - emece67 - 04-21-2015, 01:45 PM
RE: [hp41] Odd display problem - jebem - 04-22-2015, 04:57 PM
RE: [hp41] Odd display problem - emece67 - 04-22-2015, 08:57 PM
RE: [hp41] Odd display problem - emece67 - 04-26-2015, 07:29 PM
RE: [hp41] Odd display problem - emece67 - 04-27-2015, 06:40 PM
RE: [hp41] Odd display problem - emece67 - 04-28-2015 07:55 PM
RE: [hp41] Odd display problem - jebem - 04-28-2015, 10:16 PM
RE: [hp41] Odd display problem - emece67 - 04-29-2015, 04:46 PM
RE: [hp41] Odd display problem - TASP - 04-29-2015, 05:01 PM
RE: [hp41] Odd display problem - emece67 - 04-30-2015, 10:29 PM
RE: [hp41] Odd display problem - emece67 - 04-30-2015, 11:22 PM
RE: [hp41] Odd display problem - emece67 - 05-01-2015, 07:25 PM
RE: [hp41] Odd display problem - emece67 - 05-01-2015, 07:30 PM
RE: [hp41] Odd display problem - emece67 - 05-01-2015, 11:22 PM
RE: [hp41] Odd display problem - emece67 - 05-03-2015, 12:02 AM



User(s) browsing this thread: 5 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication