air traffic control program for Tandy model 102
|
05-26-2015, 09:37 PM
Post: #7
|
|||
|
|||
RE: air traffic control program for Tandy model 102
(05-26-2015 06:21 PM)Dave Britten Wrote: I wonder if some place like Digikey or Jameco sells the appropriate RAM chip for upgrading a 102. I remember ordering a bunch of bare 128 KB chips from Jameco in the late '90s to upgrade an Apple IIgs memory expansion board. Unfortunately no, those machines came out well before the 32k CMOS static RAM, so they sort of invented their own pinout for the little 8k modules. Same with the ROM on the earlier M100's which also had a non-standard pinout. If you wanted a project, you could probably replace the entire 32k RAM with a single chip, but it would require quite a lot of white-wires, trace cutting and some external decoder logic. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
air traffic control program for Tandy model 102 - Don Shepherd - 05-25-2015, 12:43 AM
RE: air traffic control program for Tandy model 102 - BobVA - 05-26-2015, 02:34 AM
RE: air traffic control program for Tandy model 102 - Don Shepherd - 05-26-2015, 11:52 AM
RE: air traffic control program for Tandy model 102 - Dave Britten - 05-26-2015, 06:21 PM
RE: air traffic control program for Tandy model 102 - Dieter - 05-26-2015, 06:35 PM
RE: air traffic control program for Tandy model 102 - Dave Britten - 05-26-2015, 07:08 PM
RE: air traffic control program for Tandy model 102 - BobVA - 05-26-2015 09:37 PM
RE: air traffic control program for Tandy model 102 - BobVA - 05-26-2015, 09:43 PM
|
User(s) browsing this thread: 3 Guest(s)